Dsynth- Macro ctrl dead knob?

Questions and Answers concerning the spectralis!

Moderator: Jörg Schaaf

Dsynth- Macro ctrl dead knob?

Postby flave » Mon Feb 08, 2016 12:12 pm

Hey! I'm pushing the macro control knob to set the sample start point and mono/poly mode without success. Am i missing something or is the knob malfunctioning? Upgraded the OS to 1.70.

Thanks!
flave
 
Posts: 3
Joined: Fri Jun 15, 2007 11:51 am

Re: Dsynth- Macro ctrl dead knob?

Postby via » Mon Feb 08, 2016 2:25 pm

Mk1 yhea ..?

If so pull the encoder itself up and replace it again on the shaft .. Or just pull it upp a little bit and press down again .. Its the plastic cap/encoder that gets stuck down ..
via
 
Posts: 712
Joined: Sat Aug 19, 2006 3:19 am

Re: Dsynth- Macro ctrl dead knob?

Postby flave » Mon Feb 08, 2016 2:52 pm

FIXED! :D Many thanks, Via! Yes i'm loving the mk1.

Have nice day
flave
 
Posts: 3
Joined: Fri Jun 15, 2007 11:51 am

Re: Dsynth- Macro ctrl dead knob?

Postby Gonzini » Tue Feb 09, 2016 10:07 am

I remember that problem. I fixed mine by using a standard hole punch to make some round packing bits then trimmed the corner off to make a D shape. Can't remember what material i used but something like 1mm thick i would think.
Gonzini
 
Posts: 257
Joined: Fri Feb 19, 2010 9:07 pm


Return to Helpdesk

Who is online

Users browsing this forum: No registered users and 3 guests