Version 1.60 online

Here is the place for Update downloads and discussions.

Version 1.60 online

Postby Jörg Schaaf » Thu Jan 31, 2013 10:31 pm

Check the latest version in the download section of the Radikal website:
http://www.radikaltechnologies.com/acce ... loads.html

Unisono Detune :mrgreen:
Sequenzer MIDI out :lol:
Parts 3-8 can be assigned to dry output or FX bus 1 and 2 :mrgreen:

Here follows the change.log with the detailed informations about the update....

=> 20120115 V1.55
- Fix: MIDI Controllers received on second USB Port were not forwarded to MIDI Output
- New: Local Off
- New: ARP created notes follow assignment in Zone Table
- New: Added Target Settings in Sequencer (valid for all sequence lines)

=> 20120423 V1.56
- New: Swing for ARP
- Fix: When MIDI-Routing changed (Zone-Assignment, Play-Mode, Performance change etc.),
only for notes tracking of settings during Note On was implemented. Controllers did
not touch "original" zone assignment, which, for example produces hanging notes
when this routing is changed while the sustain pedal is held. This version takes
track of at least controllers 64..69 (Hold, Portamento, Sustenuto, Soft, Legato, Hold2)
and sends the Off-Event also to that zone which was active during the On-Event.
However, this does not change behaviour of Mod-Wheel, Pitchbender etc, their states
will still be frozen on the "leaving" part until return...

=> 20120713 V1.57
- Fix: Zone Transpose not reset when Local Zone Transpose Flag reset
- Fix: Several received NRPN controls may corrupt sound system (or even crash the device)
- Fix: MasterVolume set to 50 at startup (wasn't updated before and jumping to previous value on first touch)
- Mod: LoclOff=[OFF|ON] changed to Local=[ON|OFF]
- Mod: Unisono detune changeable during runtime
- Mod: Parts 3..8 assignable to all three Buses (Part1, Part2 and Dry).
- Parts 1&2 not assignable to keep FX 1&2 editable
- Would be nice to have FX editable from Part3..8 depending on current assignment, but that's not easy...

=> 20121129 V1.58 - Migrated to CCS V5
- Fix: Strings for MIDI Input/Output ports verified during startup and re-initialized when damaged.
- Fix: System may crash when opening MIDI Log
- Fix: Controllers only recognized on Part1

=> 20130120 V1.60
- Fix: Note OFF from MIDI only recognized on first Part
New users please check the following link for forum activation:
http://www.forum.radikaltechnologies.com/viewtopic.php?f=8&t=921
http://www.myspace.com/jorgschaaf
http://www.youtube.com/user/SCHAAFJOERG
User avatar
Jörg Schaaf
 
Posts: 1096
Joined: Sat Aug 20, 2005 1:46 am
Location: Germany

Re: Version 1.60 online

Postby Fent » Fri Feb 01, 2013 2:43 pm

[quote="Jörg Schaaf"]Check the latest version in the download section of the Radikal website:
http://www.radikaltechnologies.com/acce ... loads.html

Unisono Detune :mrgreen:
Sequenzer MIDI out :lol:
Parts 3-8 can be assigned to dry output or FX bus 1 and 2 :mrgreen:



Thanks Jorg. Appreciate the update! :D
Fent
 
Posts: 106
Joined: Thu Oct 20, 2011 12:17 am

Re: Version 1.60 online

Postby acemonvw » Fri Feb 01, 2013 5:10 pm

Lucky... :cry:

Or in the words of napoleon dynamite:
http://www.youtube.com/watch?v=uFN_tBT-xZE
User avatar
acemonvw
 
Posts: 1214
Joined: Fri Mar 18, 2011 8:28 pm
Location: Minneapolis, MN

Re: Version 1.60 online

Postby mkastrup » Mon Feb 04, 2013 1:38 pm

Weee Yay Yahoooo :D Looking forward to this, Super Thanks Jorg and Team :)
mkastrup
 
Posts: 38
Joined: Wed Feb 29, 2012 9:54 pm

Re: Version 1.60 online

Postby mkastrup » Mon Feb 04, 2013 2:48 pm

OK this is how i got my update on Accelerator:

First, starting the update program under Win 7 64bit crashed the update program, then i tried remove all USB things i could think of and retried, still no luck, update program crash.

Ohh well, i took out my old Laptop with Win XP connected Accelerator, started the program and whoops there she was. All looked like it was going to work this time.

K, these are the steps i took to get the 1.60 update on my Accelerator:

Copy the update program to Laptop Win XP
Connect Accelerator to Laptop using USB
Confirm that Win XP see the new USB connection
Shut down Accelerator
Start up Accelerator in FLASH UPDATE mode by holding START + FX Bypass and power on Accelerator.
Check the new screen on Accelerator, yep this looks like something update like.
Run the update program on Win XP
Use SCAN on the update program, it should find the Accelerator.
Press START on the update program, wait until its finished, takes about 30 sec.
When the update program in Accelerator window reach 100% then update program on Win XP confirms and say
its safe to power of Accelerator.

Advise to all synth hardware users, always make sure you have a working Win XP around somewhere. If not i suggest you pick up an old used laptop/desktop with Win XP.

K i'm off to check all the new updated features, have fun all :)
mkastrup
 
Posts: 38
Joined: Wed Feb 29, 2012 9:54 pm

Re: Version 1.60 online

Postby Jörg Schaaf » Wed Feb 06, 2013 3:50 pm

Here is a little update trailer:
http://www.youtube.com/watch?v=U6i8zxjlN0w

The big gong is one of the percussion instruments, I sampled for the next Spectralis sample library. Sounds huge and get's crossfaded into the unisono detuned sawtooth wave of the Accelerator in that video...
New users please check the following link for forum activation:
http://www.forum.radikaltechnologies.com/viewtopic.php?f=8&t=921
http://www.myspace.com/jorgschaaf
http://www.youtube.com/user/SCHAAFJOERG
User avatar
Jörg Schaaf
 
Posts: 1096
Joined: Sat Aug 20, 2005 1:46 am
Location: Germany

Re: Version 1.60 online

Postby acemonvw » Wed Feb 06, 2013 4:33 pm

Cool!

;-)
User avatar
acemonvw
 
Posts: 1214
Joined: Fri Mar 18, 2011 8:28 pm
Location: Minneapolis, MN

Re: Version 1.60 online

Postby via » Thu Feb 07, 2013 8:10 am

Here is a little update trailer:
http://www.youtube.com/watch?v=U6i8zxjlN0w

The big gong is one of the percussion instruments, I sampled for the next Spectralis sample library. Sounds huge and get's crossfaded into the unisono detuned sawtooth wave of the Accelerator in that video...


congrats on the upgrade!!
but
who was that random woman from a shampoo commercial that popped into that video for no apparent reason...??? :lol:

anyway I don´t mean to be an total jerk, but the most exiting thing in this thread to me is hearing ´´this is a big gong form the next Spectralis sample library ´´ ... 8)
via
 
Posts: 712
Joined: Sat Aug 19, 2006 3:19 am

Re: Version 1.60 online

Postby Jörg Schaaf » Thu Feb 07, 2013 6:10 pm

Version 1.61 is online. We had a problem with a couple of instruments, that were rendered silent after the update. Beside the fact, that some users just were confused by their Acc's local off settings, some instruments really were not able to initialize the DSP anymore. We meanwhile fixed that with the version 1.61.
If one still experience that problem, please give us a brief message. In that case we should also reprogram the bootloader to a newer version.

j.schaaf(at)radikaltechnologies(dot)com
New users please check the following link for forum activation:
http://www.forum.radikaltechnologies.com/viewtopic.php?f=8&t=921
http://www.myspace.com/jorgschaaf
http://www.youtube.com/user/SCHAAFJOERG
User avatar
Jörg Schaaf
 
Posts: 1096
Joined: Sat Aug 20, 2005 1:46 am
Location: Germany

Re: Version 1.60 online

Postby mofo2009 » Thu Feb 07, 2013 7:35 pm

Hello Jorg,

How about a Accelerator sample library for the Spectralis? Please :)

Peace from Detroit!
mofo2009
 
Posts: 28
Joined: Sat Nov 21, 2009 1:24 pm

Next

Return to Updates

Who is online

Users browsing this forum: No registered users and 1 guest

cron